Owner's Manual

Engine Oil Change

Drain the oil while the engine is warm to assure complete and rapid

draining.

1. Open the maintenance cover (see page 23).

2. Remove the oil filler cap and drain bolt to drain the oil.

3. After draining is complete, check that the sealing washer is in good

condition (replace if necessary), then retighten the drain bolt securely.

4. Refill with the recommended engine oil and check the oil level with

the oil level gauge (see page

24).

5. Install the oil filler cap.

6. Start the engine and allow it to warm to normal operating temperature.

Stop the engine and recheck the oil level with the oil level gauge (see

page 24). Add if necessary.

OIL FILLER CAP

GAUGE

OIL GRAIN BOLT

ENGINE OIL CAPACITY: 4.8 lit. (5.0 US qt. 4.2 Imp qt)

Please dispose of used motor oil and the oil containers in a manner that

is compatible with the environment. We suggest you take used oil in a

sealed container to your local service station for reclamation. Do not

throw it in the trash or pour it on the ground.