Owner's Manual

6. GENERATOR USE
1
Connections to a Building’s Electrical System
If the generator will be used as an alternative to utility company power, an
isolation switch must be installed to disconnect the utility lines from the
building when the generator is connected. Installation must be performed
by a qualified electrician and must comply with all applicable laws and
electrical codes.
!
m
Improper connections to a building’s electrical system can
allow electricity from the generator to backfeed into utility lines and may
cause serious injury or death to utility company workers or others who
contact the lines. Consult the utility company or a qualified electrician.
I] Im
proper connections to a building’s electrical system can allow
electricity from the utility company to backfeed into the generator, which
will severely damage the generator and may cause a fire.
In some areas, generators are required by law to be registered with local
utility companies. Check local regulations for proper registration and use
procedures.
To ground the generator chassis, connect a length of heavy wire between
the ground terminal and an independant ground source. Consult a qualified
electrician for your particular application.
GROUND
TERMINAL
26