Owner's Manual

Coolant Recommendation

Use high quality ethylene glycol antifreeze that is specifically formulated

for use in aluminum engines. Mix the antifreeze with low-mineral drinking

water or distilled water.

A 50/50 mixture of ethylene glycol antifreeze and water is recommended

for most temperature and provides good corrosion brotection. A higher

concentration of antifreeze decrease cooling efficiency and is recommend-

ed only if additional protection against freezing is needed. A concentration

of less than 40% antifreeze will not provide proper corrosion protection.

[ NOTICE ] Th

e use of unsuitable antifreeze, hard water, or salt water will

cause corrosion damage that will shorten the life of the engine.

Fuel Filter

1. Open the maintenance cover (see page 13).

2. Inspect the fuel filter for dirt, water, or other contaminates and clean

the fuel filter if necessary (see page 37).

FUEL STRAINER

STRAINEi ELEMENT