Operation Manual

52
Maintenance
Maintenance Fundamentals
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tyre, can be a major inconvenience.
Check the following items before you ride
motorcycle:
● Fuel level − Fill fuel tank when necessary.
2 P. 42
● Throttle − Check for smooth opening and
full closing in all steering positions.
2 P. 90
● Engine oil level − Add engine oil if
necessary. Check for leaks. 2 P. 70
● Coolant level − Add coolant if required.
Check for leaks. 2 P. 76
● Drive chain − Check condition and slack,
adjust and lubricate if necessary.
2 P. 82
● Brakes − Check operation;
Front and Rear: check brake fluid level and
pads wear.
2 P. 78, 79
● Lights and horn − Check that lights,
indicators and horn function properly.
● Engine stop switch − Check for proper
function.
● Side stand ignition cut-off system − Check
for proper function.
2 P. 81
● Wheels and tyres − Check condition, air
pressure and adjust if necessary. 2 P. 59
● Clutch − Check operation;
Adjust freeplay if necessary. 2 P. 87
Pre-ride Inspection
CTX700A only
14 CTX700-32MJF8000.book 52 ページ ２０１３年５月９日 木曜日 午後９時５９分