Operation Manual

27
Operation Guide
2 To set the clock:
!a After backlight brightness adjustment, the
hour digits start flashing.
!b Press the B button until the desired hour and
AM/PM are displayed.
u Press and hold to advance the hour fast.
!c Press the A button. The minute digits start
flashing.
!d Press the B button until the desired minute is
displayed.
u Press and hold to advance the minute
fast.
!e
Press the A button. The clock is set, and
then the display returns to the backlight
brightness adjustment.
Press the A button. The clock is set, and
then the display moves to the changing of
the speed and mileage unit.
3 Changing the speed and
mileage unit:
!a After clock setting, the speed and mileage
unit start flashing.
!b Press the B button to select either “km/h”
and “km” or “mph” and “mile”.
!c Press the A button. The speed and mileage
unit is set, and then the display returns to
the backlight brightness adjustment.
Except E type
E type only
E type only
14 CTX700-32MJF8000.book 27 ページ ２０１３年５月９日 木曜日 午後９時５９分