Operation Manual

26
Instruments (Continued)
Operation Guide
Display Setting
You can adjust the three settings.
• Backlight brightness adjustment
• Clock setting
• Changing of speed and
mileage unit
In addition, to return to the ordinary display
at display setting.
• The button is not pressed for about 30
seconds
• Turn the ignition switch off and then on
Each setting will be cancelled if the A button
is not pressed.
1 Backlight brightness adjustment:
You can adjust the brightness to one of three
levels.
!a Turn the ignition switch to ON.
!b
Press and hold the A button and B button until
the minute digit displays the brightness level.
!c Press the B button. The brightness is switched.
!d Press the A button. The backlight is set, and
then the display moves to the clock setting.
E type only
Ordinary display
Backlight brightness adjustment
Clock setting
Changing of speed and mileage unit
Press and hold the A button and B button
Press the A button
Except E type
Press the A button
E type only
Display setting
14 CTX700-32MJF8000.book 26 ページ ２０１３年５月９日 木曜日 午後９時５９分