Operation Manual

Drive Chain u Adjusting the Drive Chain Slack
71
continued
Maintenance
Adjusting the Drive Chain Slack
Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
When adjusting the drive chain slack, be
careful not to damage the wheel speed
sensor and pulser ring.
1. Stop the engine place the gear in Neutral.
2. Place your motorcycle on the side stand
on a level surface.
3. Loosen the rear axle nut.
4. Loosen the lock nuts on both adjusting
bolts.
CBR650FA only
Scale
graduations
Lock nut
Adjusting bolt
Adjusting plate
Rear axle nut
Adjusting bolt
Scale
graduations
Lock nut
Adjusting plate
14 CBR650F FA-32MJEB000.book 71 ページ ２０１３年１２月２６日 木曜日 午後３時５８分