Operation Manual

Engine Oil u Changing Engine Oil & Filter
63
Maintenance
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
10. Fill the crankcase with the recommended
oil ( 2 P. 50 ) and install the oil fill cap/
dipstick.
11. Check the oil level. 2 P. 60
12. Check that there are no oil leaks.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
Rubber
seal
Oil filter
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
Required oil
When changing oil &
engine oil filter:
2.9 litres (3.1 US qt, 2.6 Imp qt)
When changing oil only:
2.6 litres (2.7 US qt, 2.3 Imp qt)
14 CBR650F FA-32MJEB000.book 63 ページ ２０１３年１２月２６日 木曜日 午後３時５８分