Operation Manual

Tyre Puncture u Removing Wheels
89
continued
Troubleshooting
4. Loosen the axle pinch bolt and front axle
shaft.
5. Support your motorcycle securely and
raise the front wheel off the ground
using a maintenance stand or a hoist.
6. Remove the front axle shaft, front wheel
and side collars.
Installation
1. Attach the side collars to the wheel.
2. On the left side, place the wheel
between the fork legs and insert the
front axle shaft to the end, through the
left fork leg and wheel hub.
3. Tighten the axle shaft.
Front axle shaft
Axle pinch bolt
Side collar
Torque: 54 N·m (5.5 kgf·m, 40 lbf·ft).
13 CBR500R-32MGZB000.book 89 ページ ２０１２年１２月１２日 水曜日 午後３時４７分