Operation Manual

Engine Oil u Changing Engine Oil & Filter
64
Maintenance
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
10. Fill the crankcase with the recommended
oil (2 P. 48) and install the oil fill cap.
11. Check the oil level. 2 P. 61
12. Check that there are no oil leaks.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
Rubber
seal
Oil filter
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
Required oil
When changing oil &
engine oil filter:
2.7 litres (2.9 US qt, 2.4 Imp qt)
When changing oil only:
2.5 litres (2.6 US qt, 2.2 Imp qt)
13 CBR500R-32MGZB000.book 64 ページ ２０１２年１２月１２日 水曜日 午後３時４７分