Operation Manual

−
20
Gauges, Indicators & Displays
Instruments & Controls
Lamp Check.
Lamp Check.
Lamp Check.
Lights when there is any abnormality in the PGM-FI
(Programmed Fuel Injection) system. Should also
light for a few seconds and then go off when the
ignition switch is turned ON and the engine stop
switch is at RUN. If the indicator comes on at any
other time, reduce speed and take your motorcycle to
a Honda dealer as soon as possible.
HESD indicator
(red)
7
8
9 high coolant temperature
indicator (red)
Lights when the coolant is over the specified
temperature. If the indicator comes on, pull safely to
the side of the road. See pages for
instructions and cautions.
Lights when there is any abnormality in the HESD
(Honda Electronic Steering Damper). Should also
light for a few seconds and then go off when the
ignition switch is turned ON and the engine stop
switch is at RUN. If the indicator comes on at any
other time, reduce speed and take your motorcycle to
a Honda dealer as soon as possible (page ).
PGM-FI malfunction
indicator lamp (MIL)
(amber)
39
202 203
０８／０９／１９ ２０：３９：２９ ３１ＭＦＪ６２０ ００２９