Operation Manual

131
Suspension
Servicing Your Honda
To Reduce Compression Damping
(SOFT):
To Increase Compression Damping
(HARD):
To adjust to the standard position:
Turn the damping adjuster ( )
clockwise until it will no longer turn
(lightly seats). This is the full hard
setting.
Turn the adjuster counterclockwise
approximately turns so that the
punch mark ( ) on the adjuster aligns
with the reference punch mark ( ). This
is the standard position.
Make sure that both fork legs are
adjusted to the same position.
For a light load and smooth road
conditions, turn the adjuster
counterclockwise toward SOFT (S).
For a firmer ride and rough road
conditions, turn the adjuster clockwise
toward HARD (H).
1.
2.
3.
1
2
2
3
０８／０９／１９ ２０：５３：０６ ３１ＭＦＪ６２０ ０１４０