Owner's Manual

80
1
GPS Mode
GPScape System
3. To select a higher waypoint number (1),
press and release the plus button (2).
To select a lower waypoint number, press
and release the minus button (3).
To fast scroll, press and hold the plus or
minus button until the desired waypoint
number appears.
4. Press and hold the WP SET button (4) for
about 2 seconds, until the waypoint
number flashes. Then release the button.
5. While the display is still blinking, press and
hold the WP SET button again for about 2
seconds until LAT appears above the WP
SET mark. The compass direction indicator
will flash Northern Latitude (5) or Southern
Latitude (6), indicating the hemisphere. (To
switch to the other hemisphere, press either
the plus or minus button.)
6. Tap (do not hold) the WP SET button. The
compass direction indicator will stop flashing
and the degree (7) will begin flashing.
7. To select your entry:
• To increase, tap the plus button
• To decrease, tap the minus button.
• To fast change in units of 10, press and
hold the plus button (to increase) or the
minus button (to decrease) until the
desired entry appears.
80
(5) Northern Latitude (7) degree
(6) Southern Latitude
(5)
(6)
(7)