Owner's Manual

52
1
Instruments & Controls
52
The two bilge drain plugs (1) are used to
drain water from the engine compartment.
This operation should be performed with your
PWC out of the water and the engine off. The
plugs must be secured before returning your
PWC to the water to avoid possible engine
damage.
The flushing connector (1) is used for
attaching a garden hose to flush the engine
cooling system (page 189).
REAR
(1) flushing connector
Controls & Features
Bilge Drain Plugs
Flushing Connector
(1)
(1) bilge drain plugs (A) open
(B) close
REAR
(A)
(1)
(B)