Owner's Manual

95
1
Is Your PWC Ready To Ride?
Before Riding
Check these items which require starting and
flushing the engine on shore (see
Flushing
Procedure,
page 189. If necessary, these
procedures may be performed with your
PWC on calm water):
Insert the lock clip in the
engine stop switch.
Push the start button after
ventilating the engine
compartment.
Stop the engine by pushing
the engine stop button. Start
the engine again and stop it
by removing the lock clip.
Check the water comes out
from the cooling water
bypass outlet.
Check the level and add oil if
needed (page 162).
Check that the OTS
activates properly (page
194).
95
Engine Start
& Stop
Engine
Cooling
System
Engine Oil
Off-throttle
Steering
System (OTS)