Owner's Manual

Instruments & Controls

Multi-function Display

7 PGM-FI malfunction indicator Flashes when there is some abnormality in the

lamp (MIL) PGM-FI (Programmed Fuel Injection) system.

Occasionally, depending on the abnormality, engine

revs may be limited to less than 3,000 rpm. In

extreme cases, the engine will stop.

If the indicator flashes, immediately take the

shortest route to land.

If the engine stops, tow your PWC to land.

This indicator is usually off.

8 SET button Resets the tripmeter and time meter to zero (0)

(page 26).

Also used to set the digital clock (page 32).

9 MODE button Selects the mode of the multi-function meter: digital

clock, tachometer, time meter, tripmeter, hourmeter.

Selects ON or OFF for the limit mode.

Also used to set the digital clock (page 32).