Owner's Manual

Servicing Your Honda
128
Engine Oil & Filter
6. Remove the oil filler cap/dipstick (5) and
wipe it clean.
7. Insert the dipstick until it seat, but don’t
screw it in.
8. Remove the oil filler cap/dipstick (5) and
check the oil level.
• If the oil is at or near the upper level
mark (6) – you do not have to add oil.
• If the oil is below or near the lower level
mark (7) – remove the oil filler
cap/dipstick (5) and add the
recommended oil until it reaches the
upper level mark. (Do not overfill.)
Wipe up any spilled oil immediately.
9. Reinstall the dipstick.
ENGINE COMPARTMENT
(5) oil filler cap/dipstick
(6) upper level mark
(7) lower level mark
(5)
10.Check for oil leaks.
(6)
(7)