user manual

12
Well? What are you waiting for start your engine!
Some advice: Charge the battery fully!
Crank the motor with the release in to charge the caps in the CDI box and then freshen the fuel
charge in the cylinder.
With the choke on full hit the button for a few seconds then dump the release lever, the bike, if jetted
properly should fire right up.
The skid plate may need to be bent to clear the case and the shift lever will need to be tweaked
I bent it by putting it in a vise before the weld. In other word don’t bent it at the weld it will break!
Final words and disclaimers legal stuff; crap my lawyer made me say.
This kit has no warranty.
The CDI has a 1-year box and Honda parts have a 30-day limited warranty.
This kit is considered an aftermarket performance based add on.
Please read the instructions carefully and if you’re NOT SURE call me!
Because of the do it your self-installation I can make no guaranties on the install.
If you are colorblind challenged, I can make a black and white harness for you or get a friend to help.
The failure mode is the needle bearing doesn’t get oiled properly or the big bolt didn’t get Locktite and
the proper torque.
So again, read the instructions carefully.