Motorcycle User Manual

©2006 American Honda Motor Co., Inc. - All Rights Reserved 5
5.Remove the motorcycle from the
crate base.
Install lifting slings on the engine guards and
grab rails as shown.
If necessary, use a spreader board to prevent
the slings from damaging the motorcycle.
Lift the slings just enough to remove
the slack.
Loosen the caliper bolts, axle bolt, and axle
pinch bolts. Remove the washer bolts, and
lower shipping bracket from the crate base.
Discard the washer bolts.
SLINGS
RIGHT SIDE
LEFT SIDE
CALIPER BOLTS
CALIPER BOLTS
AXLE BOLT
PINCH BOLTS
LOWER
SHIPPING
BRACKET
WASHER BOLTS
(discard)