Motorcycle User Manual

©2006 American Honda Motor Co., Inc. - All Rights Reserved 23
26.Adjust the front seat height.
The front seat height of the ST1300/A can be
adjusted for rider preference.
Remove the rear seat by referring to the
instructions in step 11.
Remove the front seat by following the
instructions in step 17.
Move the seat height adjuster into one of the
three positions on the guide as shown.
Be sure to align the holes in the rear of the
front seat with the adjuster when installing
the seat.
Reinstall the front seat by referring to the
instructions in step 17.
Reinstall the rear seat by following the
instructions in step 13.
27.Complete the Set-up/Pre-delivery form.
Complete an On-Road Motorcycle Set-up/Pre-
delivery Checklist (Reorder No. S0299, also
available on iN) by checking the boxes
confirming the steps were done.
MIDDLE POSITION
LOW POSITION
HIGH POSITION
GUIDE
SEAT HEIGHT ADJUSTER