User Instructions

ManualsBrandsHoncam technology ManualsAudio Equipment2.4G Wireless Gaming Microphone

Honcam Technology Co.,Ltd

instructions

一、 Product introduction:

1. It can compatible with various of game console.

2. Using professional-grade hi-fi core, highly restore human voice.

3. Plug and play, convenient and unconstrained.

4. Exquisite & ergonomic design, comfortable grip.

5. Adopt wireless 2.4G RF technology with stable signal, anti-interference, constant frequency, no

distortion of sound quality, and low sound delay.

6. Intelligent energy-saving design, enter the dormant shutdown state without sound input for 10 minutes.

7. Adopt 2 external batteries No. 5/LR6 AA 1.5V for power supply, long battery life of more than 20 hours.

8. One-to-one use (one microphone with one receiver).

二、 Product appearance:

Product Size:

1. Microphone : L 242mm x W 50mm.

2. Receiver: L 48.6mm x W 18.4mm x H 8.8mm.

三、 Product Parameters:

Summary of content (5 pages)

PAGE 1
Honcam Technology Co.,Ltd instructions 一、 Product introduction: 1. It can compatible with various of game console. 2. Using professional-grade hi-fi core, highly restore human voice. 3. Plug and play, convenient and unconstrained. 4. Exquisite & ergonomic design, comfortable grip. 5. Adopt wireless 2.4G RF technology with stable signal, anti-interference, constant frequency, no distortion of sound quality, and low sound delay. 6.
PAGE 2
Honcam Technology Co.,Ltd 1. Working distance：≥32 feet. 2. Working time: ≥20 Hour. 3. Operating Voltage: 4. a. Receiver： USB Port-5V. b. Microphone：Dry battery AA1.5V*2. Working current: a. Receiver：37mA. b. Microphone：30mA. 5. Sensitivity：-51±2dB (OdB=1V/Pa at 1KHz). 6. Impedance：600ohm±10%. 7. Frequency Response：60～14KHZ. 8. Signal to Noise：ADC/85dB，DAC/90dB. 9. Dynamic Range： ≥ 80dBA. 10. Pattern：Unidirectional. 11. Sampling Rate：16Bit/44.1K. 12. Latency：25ms. 13.
PAGE 3
Honcam Technology Co.,Ltd for 3 seconds to turn it on. 3. 【How to work PC】 a. 4. Insert the receiver into USB Port of Computer, then you can play the game and sing. 【How to work PS2】 a. Insert the receiver into USB Port of PS2 Console, then turn on the power of PS2 Console.use the PS2 controller to enter the game, and follow the game prompts after entering the game to use it. 5. 【How to work PS3】 a. Insert the receiver into USB Port of PS3 Console, then turn on the power of PS3 Console.
PAGE 4
Honcam Technology Co.,Ltd 8. 【How to work Wii】 a. Insert the receiver into USB Port of Wii Console, then turn on the power of Wii Console.use the Wii remote to enter the game, and follow the game prompts after entering the game to use it. 9. 【How to work Wii U】 a. Insert the receiver into USB Port of Wii U Console, then turn on the power of Wii/ Wii U Console.use the Wii remote to enter the game, and follow the game prompts after entering the game to use it. 10. 【How to work Switch/Switch OLED】 a.
PAGE 5
Honcam Technology Co.,Ltd FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.