Specification Sheet

28.5" 28.5" 28.5"
28.5" 28.5" 28.5"
20.0" 20.0" 20.0"
17.25" -
21.75"
6"-10" 6"-10" 6"-10"
19.25" 19.25" 19.25"
25.0" 25.0" 25.0"
KEY DIMENSIONS
HLWM.Y1 HLWM.Y2 HLWM.Y3 HLWM.W5
A Max. Width 28.5"
B Max. Depth 28.5"
C Max.Height 44.5" 46.0" 46.0" 46.0"
Chair Weight** 31# 36# 39# 35#
Shipping Weight** 40# 45# 48# 44#
Seat Size
D Width 20.0"
E
Usable Depth
15.75"
15.0"-
18.0"
15.0" -
18.0"
16.5"-
19.0"
F Height From Floor
16.5"-
21.0"
17.0" -
21.5"
17.0"-
21.5"
G Back Lumbar Height 6"-10"
Back Size
H Width 19.25"
J Height 25.0"
Chair Angles
S Seat Angle From Floor 3$ 2.5$ 2.5$ 2$
T Seat Angle Reclined 8$ 15.5$ 15.5$ 8.5$
U Back Angle From Seat 95$ 94$ 92.5$ 95$
V Back Angle Reclined* 108$ 106.5$ 111.5$ 114.5$
The HON Company
200 Oak Street
Muscatine, IA 52761
800-833-3964
www.hon.com
2014 The HON Company
HON is a registered trademark
of HNI Technologies, under license
to The HON Company.
SHEET 2 OF 3
* Back Angle Reclined From Seat
** Weights Are For Armless Use Adder Weight &
Polished Alum Base Adder Weight
C
54-6718 Rev.A
Special Features.... Pneumatic Height Adjustment
.... Lumbar Adjustment
.... Tilt Lock (Available on Y1, Y2, and Y3 Controls)
.... Tilt Lock/Limiter (Available on W5 Control)
.... Telescoping Tilt Tension Knob (Available on Y2 and Y3 Controls)
.... Front Tilt Tension Adjustment (Y1 Control)
.... Tension Range Preference Setting (W5 Control)
.... Seat Depth Adjustment (Available on Y2, Y3, and W5 Controls)
.... Independent Back Angle Adjustment (Y3 Control only)
Note................ All measurements are per BIFMA/CMD procedures.
CONSTRUCTION CONT:
HLWM ENDORSE
HLWMFC
Technical Specifications
WORK MID MESH BACK