Specification Sheet

HLWM;HLWMFC;0540671800Models:
CHAIR SPECIFICATIONDescription:
54-6718Part Number:
12-AUG-2014Issue Date:
HLWM ENDORSE
HLWMFC
Technical Specifications
WORK MID MESH BACK
Caster.............. Black open wheeled 2-1/2" diameter dual wheel.
Optional Caster..... See List Pricer.
Base................ Black 5 leg injection molded plastic, or Polished 5 leg cast aluminum.
Control............. Black heavy gauge steel, Seat Glide, Swivel, Tilt Lock, Tilt Lock/ Limiter, Synchro-Tilt, 17-4 taper.
Seat................ 5/8" thick, Composite Wood Product, 2-15/16" Thick Polyurethane Foam Cushion.
Back................ Black Plastic Injection Molded, Warp Knitted Polyester Mesh Fabric Back with Adjustable Lumbar
Arm................. "A" Height/Width Adjustable Arm with Soft Polyurethane Pad
.... "V" Height/Width/Depth/Pivot Adjustments with Soft Polyurethane Pad
.... "P" Fixed Arm with Polished Aluminum Upright and Soft Polyurethane Pad
.... "F" Fixed Arm with Black Nylon Upright and Soft Polyurethane Pad
Upholstery.......... See List Pricer. Customer own material (COM) required yardage per SKU = 1.0 yards.
Shipped............. Knocked down, requires assembling of seat and back assembly to cylinder and base.
Shipping Size....... 32-1/2" wide x 25-3/4" deep x 23" high (11.14 cubic feet). (Small Package Shippable)
Flammability
Rating.............. Furnished upon request by The HON Company Customer Service. Models HLWM meets the
State of California Department of Consumer Affairs Technical Bulletin 117 Requirements.
Models HLWMFC meets the State of California Department of Consumer Affairs Technical
Bulletin 133 Requirements.
Continued Sht 2,
CONSTRUCTION
54-6718 Rev.A
The HON Company
200 Oak Street
Muscatine, IA 52761
800-833-3964
www.hon.com
2014 The HON Company
HON is a registered trademark
of HNI Technologies, under license
to The HON Company.
C
SHEET 1 OF 3
H
J
N
K
D
A
C
G
E
B
M
F
L
R
P
U
V
S
T