User's Manual

4/27
All product specifications are subject to change without notice
Cable routing and installation guide
While installing, the device should have a clear view towards potential user transmitters and
not obstructed by nearby trees or buildings. Once you pick an ideal installation spot, place the
mast bracket and wrap it around the mast, clamp the bracket and device together by tightening
screws through bolt holes on the back of device and the bracket.
LTE antenna wires need to be pulled from the N-Type connectors on device along four
bracket arms to four antennas on each corner as shown in figure2.2 and the running wires can
be fixed onto bracket arms using bracket ties. It is the best practice to keep antenna rods
perpendicular to bracket branches and make sure four antennas are evenly distributed in four
corners.
Figure 2.2 T99B226 cables top view
LTE Antenna #3
LTE Antenna #4
Cable routing on Bracket
LTE Antenna #1
LTE Antenna #2