User's Manual

36 / 37
- DEBUG
 To enable log to remote UDP server:
 Launch a web browser from a computer that is connected to DTU and access to web management
system.
 Go to Settings > System > System Log > Configpage.
 Ensure box checked,input IP address and port of destination UDP server in “Log to
Remote UDP Server”panel.
Figure 50: Enable log to remote UDP server
 Click the “Set” button.
 To enable log to remote FTP server:
 Ensure box checked,input IP address, username and password of destination FTP
server in “Log to Remote FTP Server”panel.
Figure 51: Enable log to remote FTP server
 Click the “Set” button.
6.8.9 System Reboot
 To reboot the DTU:
 Launch a web browser from a computer that is connected to DTU and access to web management
system.
 Select Settings>System>System Reboot.
 Click the Rebootbutton.
Note:It would take about 90 seconds to reboot the system.