User's Manual

27 / 37
Server state
- Connected, DTU has made successful
connection to ACS.
- Disconnected, DTU cannot connect to ACS.
 Click the “Apply” buttonfor modification take effect.
6.6 Ser2Net
Ser2Net makes it possible of transmit data from serial lined devices through LTE network, including the
following primary capabilities:
- RS232-to-net
- RS485-to-net
6.6.1 RS232toNet
 To enable RS232toNet:
 Launch a web browser from a computer that is connected to DTU and access to web management
system.
 Go to Settings > Ser2Net > RS232toNet, input relevant parameter value.
Figure 35: RS232toNet parameters
6.6.2 RS485toNet
 To enable RS485toNet:
 Launch a web browser from a computer that is connected to DTU and access to web management
system.
 Go to Settings > Ser2Net > RS485toNet, input relevant parameter value.