User's Manual

90
Troubleshooting
Printing is canceled.
• You disconnected the dedicated USB cable before the (PictBridge Connecting) mark
disappears.
Cannot insert the date or print images in the index mode.
• The printer does not provide these functions. Consult the printer manufacturer as to whether
the printer provides these functions or not.
• The date may not be inserted in the index mode depending on the printer. Consult the printer
manufacturer.
“---- -- --” is printed on the date-inserted part of the image.
• Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 78).
Cannot select the print size.
• Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
• Disconnect the dedicated USB cable and reconnect it whenever you change the paper size
after the printer has been connected to the camera.
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 78) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
Cannot reset the file-number.
• If you replace a recording medium, you cannot initialize file numbers with the camera. To
initialize file numbers, format the “Memory Stick Duo” (page 51, 52) or the internal memory,
and then initialize the settings (page 55). However, the data on the “Memory Stick Duo” or
the internal memory will be deleted and all settings, including date, will be initialized.
The camera does not function with the lens portion extended.
• Do not attempt to force the lens that has stopped moving.
• Insert new batteries or charged Nickel-Metal Hydride batteries, then turn on the camera again.
Others
「ファイル番号をリセットできない」の文言、H3合わせで
追加致しました。ご確認ください。