User's Manual
Table Of Contents
- Using the Setup screen
- Viewing images on a TV
- Using your computer
- Enjoying your Windows computer
- Installing the software (supplied)
- On the “Picture Motion Browser” (supplied)
- Copying images to your computer using the “Picture Motion Browser”
- Copying images to a computer without “Picture Motion Browser”
- Viewing image files stored on a computer with the camera copying to the “Memory Stick Duo”
- Using your Macintosh computer
- Viewing “Cyber-shot Step-up Guide”
- Printing still images
- Troubleshooting
- Others
- Index
89
Troubleshooting
Troubleshooting
Also see “PictBridge compliant printer” (as follows) in conjunction with the following items.
Images are printed with both edges cut off.
• Depending on your printer, the left, right, top, and bottom edges of the image may be cut off.
Especially when you print an image shot with the image size set to [16:9], the edge of the
image may be cut off.
• When printing images using your own printer, try canceling the trimming or borderless
settings. Consult the printer manufacturer as to whether the printer provides these functions or
not.
• When having images printed at a digital print shop, ask the shop whether they can print the
images without cutting off both edges.
Cannot print images with the date inserted.
• You can print images with the date inserted using “Picture Motion Browser” (page 64).
• This camera does not have a feature for superimposing dates on images. However, because the
images shot with the camera include information on the recording date, you can print images
with the date superimposed if the printer or the software can recognize Exif information. For
compatibility with Exif information, consult the manufacturer of the printer or the software.
• When you print images at a shop, images can be printed with the date inserted if you ask them
to do so.
A connection cannot be established.
• The camera cannot be connected directly to a printer that is not compliant with the PictBridge
standard. Consult the printer manufacturer as to whether the printer is compliant with
PictBridge or not.
• Check that the printer is turned on and can be connected to the camera.
• Set [USB Connect] to [PictBridge] in the (Setup) menu (page 56).
• Disconnect and connect the dedicated USB cable again. If an error message is indicated on the
printer, refer to the operating instructions supplied with the printer.
Cannot print images.
• Check that the camera and the printer are properly connected using the dedicated USB cable.
• Turn on the printer. For further information, refer to the operating instructions supplied with
the printer.
• If you select [Exit] during printing, images may not be printed. Disconnect and connect the
dedicated USB cable again. If you still cannot print your images, disconnect the dedicated
USB cable, turn the printer off and then on, then connect the dedicated USB cable again.
• Movies cannot be printed.
• Images shot using cameras other than this camera or images modified with a computer may
not be printed.
Printing
PictBridge compliant printer
参照ページ修正致しました。
ご確認ください。