User's Manual

65
Using your computer
Copying images to your computer using the
“Picture Motion Browser”
1 Insert a “Memory Stick Duo” with
recorded images into the camera.
• When copying images in the internal
memory, this step is unnecessary.
2 Insert the batteries with enough
capacity in the camera, or
connect the camera to a wall
outlet (wall socket) with the AC
Adaptor (not supplied).
• When you copy images to your computer
using the batteries with little remaining
charge, copying may fail or image data may
become corrupted if the batteries shuts
down too soon.
3 Press (Playback), then turn on
the computer.
“USB Mode Mass Strage” appears on the
screen of the camera.
When a USB connection is established for
the first time, your computer automatically
runs a program to recognize the camera.
Wait for a while.
• If “USB Mode Mass Strage” does not appear,
set [USB Connect] to [Mass Storage] (page 56).
Preparing the camera and the
computer
(Playback) button
Connecting the camera to your
computer
* During communication, the access indicators
turn red. Do not operate the computer until the
indicators turn white.
Dedicated USB cable
2 To a USB jack
1 To the (USB) ·
A/V OUT terminal
Access
indicators*
手順①、②の番号を入れ替えました
「バッテリーパック」を「充分容量
のある電池」に変更しております。
「バッテリーパック」を「電池」
に変更しております。
再生ボタンをみせるため、カメラと
パソコンの位置を入れ替えました。
ご確認ください。
CX6005060の記載ママです。
USBModeMassStrageに修正致しまし
た。ID394/ID1173で変数設定しており
ます。ご確認ください。
ID261
ID1173
参照ページ修正致
しました