User's Manual

Wireless LAN 802.11a/b/g/n Device 7
Figure 5: Wireless Network Connection dialog box
7. Enter the Network Key (WEP Key or WPA/WPA2 Key) for your Wireless Network.
¾ HEX: Refer to 10 Characters in HEX notation for 40 bit or 26 characters for
128 bit encryption.
¾ ASCII: Refer to 5 characters for 40 bit or 13 characters for 128 bit
encryption.
If your network is using WPA/WPA2, it is necessary to enter an 8 to 63 character
alphanumeric key-phrase. The Network Key will accept any of these as it
supports both WEP and WPA/WPA2.
8. Select Connect in Figure 5.
9. The Wireless Network Connection dialog box appears as you are being
connected.
Note: If your network is using WEP encryption, a HEX or an ASCEII formats is
necessary when entering your Network key.