User's Manual

Wireless LAN 802.11a/b/g/n Device 22
2. Select 802.1X in the Security type selection box then Wireless Network
properties dialog box appears.
Figure 22: Wireless Network Properties dialog box
3. Verify that the Network Authentication method is set to Protected EAP (PEAP) or
Smart Card or other certificate.
4. Verify that the Encryption type is set to TKIP or AES.
5. Input the Network security key then click OK.
z HEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.
z ASCII: 5 characters for 40 bit, or 13 characters for 128 bit.
You are returned to the Wireless Network Connection Properties dialog box and
are able to verify your connection.
Note: An 8-to-63 character alphanumeric key-phrase is necessary when using
the WPA/WPA2 interface. WPA/WPA2 does not require HEX or ASCII
notation common with WEP keys. Your WPA/WPA2 enabled device should
already have an 8 to 63 character alphanumeric key-phrase.