User's Manual

Wireless LAN 802.11a/b/g/n Device 18
2. Select WPA-Personal or WPA2-Personal in the Security type selection box then
Wireless Network properties dialog box appears.
Figure 18: Wireless Network Properties dialog box
3. Verify that the Encryption type is set to TKIP or AES.
4. Input the Network security key then click OK.
z HEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.
z ASCII: 5 characters for 40 bit, 13 characters for 128 bit.
You are returned to the Wireless Network Connection Properties dialog box and
are able to verify your connection.
Note: An 8-to-63 character alphanumeric key-phrase is necessary when using
the WPA/WPA2 interface. WPA/WPA2 does not require HEX or ASCII
notation common with WEP keys. Your WPA/WPA2 enabled device should
already have an 8 to 63 character alphanumeric key-phrase.