User's Manual

Wireless LAN 802.11a/b/g/n Device 13
1. Open the Wireless Network Connection Properties dialog box:
z Right click on the Wireless Networks icon in the system tray.
z Select Network and Sharing Center from the Wireless Networks I
con menu.
z The Network and Sharing Center dialog box appears.
z Click Connect to a network on the left side of the dialog box.
z The Disconnect or connect to another network dialog box appears.
z Select the wireless connection that you want to set the network security key.
Right click the network connection and select Properties, Wireless Network
Properties dialog box appears shown as below. Make sure Security tab is
selected.
Figure 13: Wireless Network Properties Dialog Box
2. Select “None” and you don’t need to set security code. Click OK.
3. Select WEP in the Encryption type selection box then Network security key box
will appear.