User Manual

DRAFT - CISCO CONFIDENTIAL
3
Regulatory Compliance and Safety Information for the Cisco 7920 Wireless IP Phone
78-15421-01
Regulatory Compliance
Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with
the same or equivalent type recommended by the manufacturer. Dispose of used batteries according
to the manufacturer's instructions.
Regulatory Compliance
The Cisco 7920 Wireless IP Phone meets the regulatory compliance and safety standards listed in
Table 1
SAR Statement
The Cisco 7920 Wireless IP Phone handset has been tested for body-worn Specific Absorption Rate
(SAR) compliance using the specific belt-clip/holster configuration provided with the handset. The FCC
has established the detailed body-worn SAR requirements and has established that these requirements
have been met with the specific belt-clip/holster provided with the handset. Other belt-clip/holsters or
similar accessories that have not been tested may not comply and therefore should be avoided.
Table 1 Regulatory Compliance and Safety Standards
Regulatory
Compliance Standard
Safety
• UL 60950 3rd
• CSA 22.2 No.950-95
• EN 60950 Second Ed., including Amendments 1-4 with all
national deviations
EMC/EMI • EN55022-Class B
• FCC Part 15.107 & 15.109 Class B
• ICES-003 Class B
• AS/NZS 3548 Class B
• EN55024
• VCCI Class B
• EN 301489-1/17
Radio
USA
• FCC Part 15.247
Canada • RSS-210 Rev 5
Japan
• TELEC T66 & 33
EU
• EN 300.328
RF Exposure
• OET-65C (01-01)
• ANSI C95.1 (91)
• RSS-102
• AS/NZS 2772