User's Manual

COMPANY CONFIDENTIAL
32
5.2 RF min. Rx sensitivity specifications
Table 5-2 Conducted min. receiver sensitivity
LTE Band (10MHz BW) 3GPP (Combined) Design Target MFG Spec
1 -97dBm -101 dBm -100 dBm
2 -95dBm -101 dBm -98 dBm
3 -94dBm -101 dBm -99 dBm
4 -97dBm -102 dBm -100 dBm
5 -95dBm -101 dBm -99 dBm
7 -95dBm -99 dBm -98 dBm
8 -94dBm -102 dBm -99 dBm
12 -94dBm -100 dBm -98 dBm
13 -94dBm -100 dBm -98 dBm
17 -94dBm -101 dBm -98 dBm
20 -94dBm -101 dBm -99 dBm
25 -93.5dBm -101 dBm -98 dBm
26 -94.5dBm -102 dBm -99 dBm
28 -95.5dBm -101 dBm -100 dBm
WCDMA 3GPP (Combined) Design Target MFG Spec
1 -106.7dBm -113 dBm -111 dBm
2 -104.7dBm -113 dBm -110 dBm
4 -106.7dBm -113 dBm -111 dBm
5 -104.7dBm -113 dBm -110 dBm
8 -103.7dBm -113 dBm -109 dBm
GPRS / E-GPRS 3GPP Design Target MFG Spec
GPRS 1800,1900 -102 dBm @ CS1 -109 dBm -107 dBm @ CS1
GPRS 850,900 -100 dBm @ CS1 -109.5 dBm -107 dBm @ CS1
EDGE 1800,1900 -98 dBm @ MCS5 -102 dBm -100 dBm @ MCS5
EDGE 850,900 -98 dBm @ MCS5 -102 dBm -100 dBm @ MCS5
CDMA 3GPP2 (Combined) Design Target MFG Spec
BC0 -104dBm -112dBm -109dBm
BC1 -104dBm -111dBm -109dBm
BC10 -104dBm -112dBm -109dBm
GPS/GLONASS
tracking sensitivity
-152dBm -161dBm -155dBm
Remark:
a. It has 3dB margin at least refer to 3GPP standard or CDMA standard.
b. The typical value of LTE was measured as combine Rx sensitivity which was follow test
setup of 3GPP standard (TS36.521 charter 7.2 and charter 7.3.5), the test setup is follow
TS36.508 Annex A Figure A.3.
SS
RX/TX
RX
UE under Test
RX/TX
Ior
Îor
Splitter/
combiner