User's Manual

ManualsBrandsHON HAI Precision Ind ManualsElectronics802.11ac+802.11abgn + BT4.0+BT3.0+BT2.1/EDR Module

COMPANY CONFIDENTIAL

Project Name

IEEE802.11 ac/n/a/b/g

Bluetooth 4.0

NFC (Near Field Communication)

NGFF1216-S3 Card

Approval Sheet Rev.

0.2

FOXCONN Part No.

T77H526.01

Module Rev. 015

Customer Part No. TBD

Prepared by Reviewed by Approved by

Wei.Liao

Approval Sheet

Summary of content (33 pages)

PAGE 1
COMPANY CONFIDENTIAL Approval Sheet Project Name IEEE802.11 ac/n/a/b/g Bluetooth 4.0 NFC (Near Field Communication) NGFF1216-S3 Card 0.2 T77H526.01 015 TBD Approval Sheet Rev. FOXCONN Part No. Module Rev. Customer Part No. Prepared by Reviewed by Wei.
PAGE 2
COMPANY CONFIDENTIAL Revision History Revision Date Originator Comment 0.1 2013/11/26 Wei.Liao Initial 0.2 2014/03/03 Wei.Liao 1> Add BAW Filter design as option 2> Add RF performance specification 3> Add package type T77H526.01 is made in China, Manufactured by HongFuJin Precision Industry Co., LTD Manufacture Site: ShenZhen, Chongqing, Nanning http://www.foxconn.
PAGE 3
COMPANY CONFIDENTIAL Content REVISION HISTORY .......................................................................................................................................................2 1. INTRODUCTION ..........................................................................................................................................................4 2. MODULE HARDWARE OVERVIEW.................................................................................................................
PAGE 4
COMPANY CONFIDENTIAL 1. Introduction The T77H526.01 NGFF1216-S3 Card is based on Marvell 88W8897-B0-CBK2-T solution with WLAN/Bluetooth/NFC functions and provides DSSS and OFDM baseband modulation, MAC, CPU, OTP (one time programmable) memory, host interfaces, power management unit (PMU) and direct conversion WLAN RF radio. 1.1 Scope IEEE 802.11 Standards 802.11 data rates of 1 and 2 Mbps 802.11b data rates of 5.5 and 11 Mbps 802.
PAGE 5
COMPANY CONFIDENTIAL 2. Module Hardware Overview Block Diagram Features IEEE802.11a/b/g/n /ac (2X2 MIMO) + BT4.0 + NFC Module. Module 2.4GHz + 5GHz bands RF interface. Host interface for WLAN, Bluetooth Configure and NFC Configure from platform. from platform. PCIE M.2 Type 1216-S3 card with 76 pins Soldered down solution Module. +3.3V +/- 5% supply power from host platform for VBAT. +1.8V +/- 5% supply power from host platform for digital IO SDIO.
PAGE 6
COMPANY CONFIDENTIAL 3. Electrical Characteristics 3.1 DC Characteristics (recommended operating rating) Parameter +3.3V (Analog power supply) +3.3V_USB (USB power supply) +VIO (Digital I/O power supply) Minimum 2.97 2.97 2.97 1.62 Typical 3.3 3.3 3.3 1.8 Maximum 3.63 3.63 3.63 1.98 Units V V V V 1.62 1.8 1.98 V -30 0 0 - ~ ~ ~ 1.0K 200 +85 90 60 - ℃ % ℃ V V VIO_SD (Digital I/O SDIO power supply) Storage Temperature Storage Humidity Operation Temperature HBM ESD Level MM 3.
PAGE 7
COMPANY CONFIDENTIAL USB 2.0 Device Interface The USB device interface is compliant with the Universal Serial Bus Specification, Revision 2.0, April 27, 2000. A USB host uses the USB cable bus and the USB 2.0 device Interface to communicate with the chip.
PAGE 8
COMPANY CONFIDENTIAL FIFO mode permanently selected for transmit and receive operations 2 pins for transmit and receive operations 2 flow control pins Interrupt triggers for low power, high throughput operation 3.4 Power up sequence The following requirements must be met for correct power up: Ramp-up time of +3.3V should be < 5ms. PDn is tied to +3.3V directly. External +3.3V/+VIO/+3.3V_USB from host VIO_SD is provided by host if SDIO interface is used.
PAGE 9
COMPANY CONFIDENTIAL 4. Mechanical Drawing 4.1 Module dimension 4.
PAGE 10
COMPANY CONFIDENTIAL 4.
PAGE 11
COMPANY CONFIDENTIAL 5. WLAN RF Specification This specification is based on additional references listed below for each RF chain. IEEE Std. 802.11ac IEEE Std. 802.11a IEEE Std. 802.11b IEEE Std. 802.11g IEEE Std. 802.11n IEEE802.11b Items Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps 2. Spectrum Mask 1) fc +/-11MHz to +/-22MHz 2) fc > +/-22MHz 3. Modulation Accuracy (EVM) 1) 1Mbps 2) 2Mbps 3) 5.5Mbps 4) 11Mbps 4.
PAGE 12
COMPANY CONFIDENTIAL IEEE802.11g Items Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4. Frequency Error RX Characteristics 5.
PAGE 13
COMPANY CONFIDENTIAL IEEE802.11n HT20-2.4G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5.
PAGE 14
COMPANY CONFIDENTIAL IEEE802.11n HT40-2.4G Items Contents Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) fc +/- 21MHz 2) fc +/- 40MHz 3) fc > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5.
PAGE 15
COMPANY CONFIDENTIAL IEEE802.11a Items Contents Standard Modulation Channel Data rate TX Characteristics 1. Power Levels (Calibrated) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 2. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) 6Mbps 2) 9Mbps 3) 12Mbps 4) 18Mbps 5) 24Mbps 6) 36Mbps 7) 48Mbps 8) 54Mbps 4. Frequency Error RX Characteristics 5.
PAGE 16
COMPANY CONFIDENTIAL IEEE802.11n HT20-5G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 3. Spectrum Mask 1) fc +/- 11MHz 2) fc +/- 20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5.
PAGE 17
COMPANY CONFIDENTIAL IEEE802.11n HT40-5G Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 2. Spectrum Mask 1) +/- 21MHz 2) +/- 40MHz 3) > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 4. Frequency Error RX Characteristics 5.
PAGE 18
COMPANY CONFIDENTIAL IEEE802.11ac VHT20 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 2. Spectrum Mask 1) fc +/-11MHz 2) fc +/-20MHz 3) fc > +/-30MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 4. Frequency Error RX Characteristics 5.
PAGE 19
COMPANY CONFIDENTIAL IEEE802.11ac VHT40 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 2. Spectrum Mask 1) fc +/-21MHz 2) fc +/-40MHz 3) fc > +/-60MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error RX Characteristics 5.
PAGE 20
COMPANY CONFIDENTIAL IEEE802.11ac VHT80 Items Standard Modulation Channel Data rate (MCS index) TX Characteristics 1. Power Levels (Calibrated) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 2. Spectrum Mask 1) +/-41MHz 2) +/-80MHz 3) +/-120MHz 3. Modulation Accuracy (EVM) 1) MCS0 2) MCS1 3) MCS2 4) MCS3 5) MCS4 6) MCS5 7) MCS6 8) MCS7 9) MCS8 10) MCS9 4. Frequency Error RX Characteristics 5.
PAGE 21
COMPANY CONFIDENTIAL Bluetooth 4.0 Items Standard Contents Bluetooth 4.0 Basic rate (BR), Enhanced data rate (EDR). Bluetooth low energy (BLE). 1Mbps(GFSK), 2Mbps( /4-DQPSK), 3Mbps(8-DPSK) 2.402GHz ~ 2.480GHz (CH0~CH78) 1 MHz for BR,EDR, 2MHz for LE Time-Division Duplex (TDD) scheme Min. Typ. Max. Unit Modulation π Channel Channel spacing Duplex transmission TX Characteristics - BR 1. Power Levels 1Mbps (GFSK) 2. Frequency Tolerance Initial center frequency 3.
PAGE 22
COMPANY CONFIDENTIAL |f1 – f0| |fn – fn-5|, n = 6, 7, 8...k - RX Characteristics 1. Minimum Input Level Sensitivity GFSK (1Mbps) (BER 0.1%) /4 DQPSK (2Mbps) (BER 0.1%) 8DPSK (3Mbps) (BER 0.1%) GFSK (1Mbps) – BLE (BER< 30.8%) 2. Maximum Input Level GFSK (1Mbps) (BER 0.1%) /4 DQPSK (2Mbps) (BER 0.1%) 8DPSK (3Mbps) (BER 0.1%) GFSK (1Mbps) – BLE (BER< 30.8%) π ≦ ≦ ≦ π ≦ ≦ ≦ 22 0.98 0.49 20 20 kHz kHz Min. Typ. Max.
PAGE 23
COMPANY CONFIDENTIAL 6.
PAGE 24
COMPANY CONFIDENTIAL 24
PAGE 25
COMPANY CONFIDENTIAL 25
PAGE 26
COMPANY CONFIDENTIAL 7. Software Requirement Marvell is the owner for driver and Firmware release.
PAGE 27
COMPANY CONFIDENTIAL 8.
PAGE 28
COMPANY CONFIDENTIAL 9. Environmental Requirements 1> Operating Temperature Conditions The product shall be capable of continuous reliable operation when operating in ambient temperature of 0°C to 60°C. 2> Non-Operating Temperature Conditions Neither subassemblies shall be damaged nor shall the operational performance be degraded when restored to the operating temperature when exposed to storage temperature in the range of -20°C to +85°C.
PAGE 29
COMPANY CONFIDENTIAL 10. Soldering and reflow condition Reflow soldering shall be done according to the below temperature profile.
PAGE 30
COMPANY CONFIDENTIAL Federal Communication Commission Interference Statement 10 Package information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may TBD not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 31
Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
PAGE 32
manual. Manuel d'information à l'utilisateur final L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.
PAGE 33
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire àl'établissement d'une communication satisfaisante.