User's Manual

COMPANY CONFIDENTIAL

Preliminary Datasheet

2. Introduction

Project Name: 802.11abgn (2X2) + BT4.0 combo module

This documentation describes the product specification of the WLAN+BT combo Module. WLAN is

Compliant with IEEE 802.11 a/b/g and 2x2 IEEE 802.11n MAC/ baseband/radio, Bluetooth is compliant with

Bluetooth 4.0+HS. This module takes advantage of the high throughput and extended range of Broadcom

second-generation MIMO solution. It is a confidential document of Foxconn.

* For b/g/n and a/b/g/n module, Foxconn HW/FW is the same, platform use different firmware and driver

to enable or disable 5GHz

2.1 Scope

This combo Module combines WLAN, Bluetooth in one module, the WLAN is available in the 2.4GHz

and 5GHz band, it is compatible with the IEEE 802.11 a/b/g standard and the 802.11n standard. It allow

user to switch to different vendors’ Access Points through the wireless networks and to prevent from

eavesdropping. The 802.11 a/g data rate provides for 54, 48, 36, 24, 18, 12, 9, 6Mbps, 802.11b data

rate provides for 11, 5.5, 2, 1 Mbps, it can also support 11n high data rate up to MCS15(HT40) with

PHY data rate to 300Mbps by dual stream. Bluetooth is compliant to Core Specification version 4.0.

2.2 Function

 Single stream 802.11n support for 20MHz channels provide PHY Layer rates up to 72Mbps.

 Dual stream 802.11n support for 20MHz/40MHz channels provide PHY Layer rates up to 300Mbps.

 Bluetooth supports Class 1 and Class 2 output power.

 Diplexer (which reject 2170MHz) integrated

 Provides a small form factor solution and ultra low power consumption to support low cost requirement.

 Host interface supports:

WLAN: SDIO;

BT data: UART

BT digital audio: PCM