COMPANY CONFIDENTIAL T77H395 User Manual Project Name Rev. FOXCONN Part No. Module Rev. NFC (Near Field Communication) Module 01 T77H395 045 Revision History Revision Date Originator Comment 0.1 2012/07/18 Wei.
COMPANY CONFIDENTIAL Content REVISION HISTORY .......................................................................................................................................................1 1. INTRODUCTION ..........................................................................................................................................................3 2. NFC STANDARD CONFORMANCE.................................................................................................................
COMPANY CONFIDENTIAL 1. Introduction The T77H395.00 NFC module provides contactless payment, contactless ticketing, service discovery, exchange information etc. This module is based on Broadcom BCM20792S solution, which is integrated NFC subsystem, interfaces, and microprocessor and memory unit. 1.1 Scope The NFC module supports for the ISO/IEC 18092, ISO/IEC 21481, ISO/IEC 14443 Types A, B and B’, Japanese industrial standard (JIS)(X) 6319-4, and ISO/IEC 15693 standards, etc. 1.
COMPANY CONFIDENTIAL 1.3 Electrical Characteristics Parameter Frequency Range VBAT VDD I/O Input Supply UICC (class C) Voltage UICC (class B) Communication distance Peer to Peer Communication Speed NFC wake up Operating Temperature Storage Temperature Storage Humidity Minimum Typical Maximum Units 13.56 MHz 2.3 5.5 V 1.62 3.6 V 1.78 1.88 1.98 V 2.9 3.1 3.
COMPANY CONFIDENTIAL 2.
COMPANY CONFIDENTIAL 3. Hardware Specification 3.1 Antenna Electrical Specification Parameter Typical Units Operating frequency range 13.56 MHz Communication distance > 20 mm 3.2 Antenna smith chart and on board antenna drawing. Network Analyzer used to measure s-parameters of antenna with TDK ferrite and steel plate. Frequency swept from 1 to 101 MHz. Impedance at 13.56MHz = 5.16 + j129 ohms. 3.
COMPANY CONFIDENTIAL 4. Product Requirements 4.1 Hardware Requirements 42 mm x30mm module with 10-pin FPC connector 2 BSC (I C -compatible) interface 4-layer design Form factor Host Interface PCB 4.2 Hardware Architecture The T77H395.00 NFC module is based on Broadcom BCM20792S solution, which is integrated NFC subsystem, interfaces, and microprocessor and memory unit. This module is powered from the host (3.
COMPANY CONFIDENTIAL 6. Test tool and SOP Refer to another document for test sop.