User's Manual

COMPANY CONFIDENTIAL
Data Rate
800ns GI: 13.5 Mbps, 27, 40.5, 54, 81, 108, 121.5
and 135Mbps
400ns GI: 15Mbps, 30, 45, 60, 90, 120, 135 and
150Mbps
Media Access Protocol
(MAC)
CSMA/CA (Carrier Sense Multiple Access with
Collision Avoidance)
Transmitter Output
Power
14.0 dBm+/-2dBm for all data rate
Frequency Accuracy
+/-25ppm
Minimum Receiver
Sensitivity Level
Typical –83dBm for 13.5Mbps @ 10% PER
Typical –82dBm for 27Mbps @ 10% PER
Typical –81dBm for 40.5Mbps @ 10% PER
Typical –80dBm for 54Mbps @ 10% PER
Typical –72dBm for 81Mbps @ 10% PER
Typical –71dBm for 108Mbps @ 10% PER
Typical –69dBm for 121.5Mbps @ 10% PER
Typical –67dBm for 135Mbps @ 10% PER
Maximum Receiver
Sensitivity Level
Minimum –7dBm @ 10% PER
EVM
Typical –30dB for MCS0 @14dBm output power
Typical –30dB for MCS1 @14dBm output power
Typical –30dB for MCS2 @14dBm output power
Typical –30dB for MCS3 @14dBm output power
Typical –30dB for MCS4 @14dBm output power
Typical –30dB for MCS5 @14dBm output power
Typical –30dB for MCS6 @14dBm output power
Typical –30dB for MCS7 @14dBm output power
Remark: The minimum sensitivity level is measured in FOXCONN RD Lab in shielding room. We
will back off about 3dB as manufacture test due to bad background noise and interference in our
production line.
4. Product Requirements and Characteristic
4.1 Hardware Characteristic
Form factor 44.5x40(mm
2
) module with 1x11 pin connector
Host Interface SDIO 2.0
PCB 4-layer single side
Antenna &RF connector Two printed Antenna, with one for diversity.
4.2 Hardware Architecture
The T77H262.00 802.11b/g/n module is based on Broadcom BCM4319 solution which is with integrated
2.4GHz IEEE802.11 b/g/n (MAC/baseband/radio), power amplifiers (PA), and power management unit