COMPANY CONFIDENTIAL HON HAI PRECISION IND. CO., LTD. 5F-1, 5 Hsin -An Rd. Ambit Microsystems(Shanghai) LTD. TEL: 86-21-6120-6688 Fax: 86-21-5774-9230 +886-3-577-5100 User Manual Bluetooth Module Part Name Bluetooth Module Doc. Rev. Foxconn P/N. 0.
COMPANY CONFIDENTIAL Content 1. Introduction..............................................................................................................3 1.1 Major Components ........................................................................................3 1.2 Features...........................................................................................................3 1.3 Application......................................................................................................3 2.
COMPANY CONFIDENTIAL 1. Introduction Project Name: Bluetooth Module Project Number: T77H114 This document provides information for designing and using the Broadcom Bluetooth module with BCM2070 solution. It is a confidential document of Foxconn. The Broadcom BCM2070 Bluetooth module is compatible with Bluetooth Core Specification, Version 2.1, available in the 2.4GHz (ISM) band, and support Enhanced Data Rate (EDR) and Adaptive Frequency Hopping (AFH) schemes.
COMPANY CONFIDENTIAL 2. Product Specification 2.1 Chipset 50 pin BGA BCM2070PB0KWFBG 2.2 Interfaces Bluetooth RF interface Zo = 50 ohm USB compliant 2.0 Interface Multi-Function GPIO Interface 2.3 Hardware Design Considerations 2.3.1 Power The module requires either a 3.3V or 5V supply voltage. There are 2 integrated on-chip LDOs; VREG and VREGHV. The BCM2070 I/O port is 3.3V tolerant. The core and RF run at VREG (1.2V).
COMPANY CONFIDENTIAL 3. Pin Assignment Connector: 10pin Matsushita AXK6F10347YG Pin Pin Name I/O Description 1 GND GND GND 2 BT_PRI Output INTEL_CH_CLK 3 Pairing In/Out GPIO_ANY_USE 4 Open Not Used NC 5 GND GND GND 6 LED Output BT_LED 7 USB D+ In/Out USB D+ 8 USB D- In/Out USB D- 9 WLAN_ACT Input INTEL_CH_DATA 10 3.3V Power Power Vcc 10-pin Connector Description Output indicates that the signal is driven by Bluetooth device and transmitted to other devices.
COMPANY CONFIDENTIAL 4. 2D Dimension 4.1 Module 4.2 10pin Board-to-Board Connector (Header) Manufacturer: MATSUSHITA Manufacturer P/N: AXK6F10347YG Dimensions: (Unit: mm) For AXK6F10347YG, A=5.50 mm, B=2.00 mm, C=1.25 mm.
COMPANY CONFIDENTIAL 5.3 RF connector Manufacturer: Hirose /Foxconn Manufacturer P/N: U.FL-R-SMT (10) /(HD96017) 5.3.1 Specification Operating temperature range: 0℃~70℃ Storage temperature range: 0℃~70℃ Characteristic impedance: 50Ω (0~3GHz) Voltage standing wave ratio: VSWR<=1.3 (0.045~3GHz) 5.3.
COMPANY CONFIDENTIAL Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
COMPANY CONFIDENTIAL Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules.
COMPANY CONFIDENTIAL integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. End Product Labeling The final end product must be labeled in a visible area with the following: “Contains TX IC : 2878D-T77H114”. Manual Information That Must be Included The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove.
