User's Manual

2.2.3 Site Survey

IPN2220 WLAN Utility provides the easy to link “Site Survey” option. This will allow users to connect to Access Point

intelligently. By choosing the Site Survey option, you can scan all the channels to find all the Access Points within the

range of card. The list includes information about the BSSID and SSID of the access point(s), the Mode (Network Type),

whether or not WEP encryption is used, Channel, Signal Strength and Support Rate. In order to update this list, press the

“Rescan” button.

The “Site Survey” page include, (See Fig 2-10)

 Available Networks: Users can press “Rescan” button to Scan/Rescan the environment for all existing Access

Points. User can move the cursor on the desired Access Point to join.

 Profiles: Users can click the “New”, “Delete” and “Edit” button to configure the selected profile and/or create new

profile.

Fig 2-10

If you want to associate with any of the access point(s) listed after pressing “Rescan”, Double-clicking on your choice

and the system will take you back to the Configuration page showing you the parameters of the connection newly

established. Then user can give a Profile Name for the connection. System will save all changes and options

automatically.

After connecting to Access Point, system will create a Profile in the “Profiles” screen. Users can create a “New” profile,

“Delete” profile and/or “Edit” profile by pressing the button on the right of screen. When users press the “New” and “Edit”

button, system will also pop up the Configuration page to enter the desired settings.