User's Manual

3
14 channels for Japan
Data Rate 54Mbps with fall back rates of 48, 36, 24, 18, 12,
9, and 6Mbps
Media Access Protocol CSMA/CA with ACK
Transmitter Output Power Typical 15 dBm for 54Mbps
Typical 16 dBm for 48Mbps
Typical 17 dBm for 36Mbps
Typical 18 dBm for 24, 18, 12, 9, 6Mbps
Typical 19dBm for 11, 5.5, 2, 1Mbps
Receiver Sensitivity Typical –76 dBm for 54Mbps @ 10% PER
Typical –79 dBm for 48Mbps @ 10% PER
Typical –83 dBm for 36Mbps @ 10% PER
Typical –87 dBm for 24Mbps @ 10% PER
Typical –90 dBm for 18Mbps @ 10% PER
Typical –91 dBm for 12Mbps @ 10% PER
Typical –91 dBm for 9Mbps @ 10% PER
Typical –91 dBm for 6Mbps @ 10% PER
Current Consumption 510mA at transmit mode (typically)
320mA at receive mode (typically)
1-2 FCC Notice
1.2.1 FCC Compliance
This Equipment complies with Part 68 of the FCC Rules. On this equipment is a label that
contains, among other information, the FCC registration number and Ringer Equivalence
Number (REN) for this equipment. You must, upon request, provide this information to your
telephone company.
If your telephone equipment causes harm to the telephone network, the Telephone
Company may discontinue your service temporarily. If posible, they will be notify in
advience. But if advance notice isn’ t practical, you will notified as soon as possible. You will
be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations or