User's Manual

COMPANY CONFIDENTIAL
Ambit Microsystems Corporation 國碁電子股份有限公司
中華民國臺灣省新竹縣新竹科學園區新安路 5 號 5 樓之 1
電話：886-3-5784975，傳真：886-3-5782924，Internet：http:\\www.ambit.com.tw\
18
Figure 4-8
6. Choose the security setting that is required on the wireless network. Once
the appropriate security mode is chosen the button next to the selection will
enable you to include any additional information required by that security
mode.
4-3-2 Security Settings in Profile Management
The Security Tab allows you to configure the AMBIT WLAN 802.11a/b/g device to
match the security settings of the Wireless LAN network.
Select the appropriate security mode…
• Pre-Shared Keys – This mode is commonly referred to as WEP encryption, and
allows for setting of all four WEP keys. The pre-shared key selection also
allows for setting of a unique key, which is used with higher forms of encryption
such as AES.
• LEAP – This is CCX compliant feature that allows for authentication with Cisco
access points. This mode should only be used if your Wireless LAN requires
LEAP authentication
• Externally Managed 802.1X Keys – This security mode allows for dynamic
switching of encryption keys using 802.1X authentication. This mode should
only be used if your Wireless LAN requires 802.1X authentication.
• Disabled – Use this mode when there is no security authentication or encryption
is currently enabled on your Wireless LAN network.