User's Manual

scan the specific ESSID that your profile set. If your profile set the ESSID to be

ANY, then while you press ‘Rescan’, it will scan AP in the nearby area and choose

the stronger one. From Signal level, you can tell the wireless transmission quality.

Profile

Profiles

The Profiles column will show all the profiles you set.

Active Profile List

Select the favorite profiles you want to activate in the Profiles list. While you use the

following bottoms to decide what profiles you favorers and what priority they are.

Then use ‘Apply’ to decide the Active Profile List you want. If you want to forget the

action you just do, use ‘Undo’ to turn back to the previous status.

Use it to let this specific profile add in the Active Profile List.

If you want to remove this profile out of Active Profile List, you can use it.

Use these two bottoms to change the scanning priorities

Disable Radio/Enable Radio: You can use this bottom to disable/enable Radio

by this Utility.