User's Manual

Encryption

Enable Encryption (AES/WEP): If you check the ‘Enable Encryption

(AES/WEP)’, then the Encryption Keys will need you enter the encryption keys

KEY: You can enter the key values either by "Hex Mode" or "ASCII Mode". The

encryption key value is case-sensitive. Following are the valid key value for "Hex

Mode" and "ASCII Mode".

Hex Mode:

0,1,2,3,4,5,6,7,8,9,A,B,C,D,E,F

ASCII Mode:

Numberic values in the range of "0~9",

Alphabetical characters in the range of "a~z" and

Alphabetical characters in the range of "A~Z"

Key Index: Select which key you want to enter now.

KEY1~4: Encryption key values. The key length depend on what the Key Format be

selected.

64 bits:

5-digit keys in "ASCII Mode" or

10-digit keys in "Hex Mode".

128 bits:

13-digit keys in "ASCII Mode" or

26-digit keys in "Hex Mode".