User's Manual

3
Typical –85dBm for 5.5Mbps @ 8% PER
Typical –86dBm for 2Mbps @ 8% PER
Typical –90dBm for 1Mbps @ 8% PER
Current Consumption
500mA at transmit mode (typically)
350mA at receive mode (typically)
40mA at normal power saving mode (typically)
30mA at max power saving mode (typically)
1-2 FCC Notice
USA – Federal Communication Commission (FCC)
FCC Class B Statement
This device complies with Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may
cause undesired operation.
FCC RF Safety Requirement :
The radiated output power is far below the FCC radio frequency exposure limits.
(1) Shielded cables, if any, must be used in order to comply with the emission limits.
(2) Any change or modification not expressly approved by the grantee of the
equipment authorized could void the user authority to operate the equipment
Notice: The device will automatically discontinue transmission in case of either
absence of information to transmit or operational failure. These provisions are not
intended to preclude the transmission of control or signaling information or the use of
repetitive codes used by certain digital technologies to complete frame of burst
intervals.