User's Manual

Use the Site Survey Tool. You can identify each ESSID information like MAC

Address(BSSID), channel you use, Encryption On/Off, Network Type and signal

quality.

High-light the list and double-click the selecting item will allow you to add the new

wireless Profile with corresponding parameters.

Advance

Radio Band

You can choose the Radio Band you want to use like ‘802.11a’, ‘802.11b’, ‘802.11a

Turbo’, ‘802.11g’. Currently ‘802.11g’ is not supported at our 802.11a/b MiniPCI

wireless LAN Card. And ‘802.11a Turbo’ is the specific Turbo mode for Atheros

solution to let you reach the data rate up to 108Mbps while connecting to the same

Atheros AP that also enable this turbo mode.

Transmit Parameter

You can set TX Rate of 802.11a or 802.11b by checking ‘Enable TX Rate Control’.

Then go to TX Rate (802.11a or 802.11b) to choose the data rate you want to fix.

Transmit Power: You can choose the Full Power, 50%, 25%, 12% or Lowest Power

depend on the device distance you want to associate with. While the device is very

close to your Wireless LAN Card, then you can choose Lowest output Power to save

the battery life.

Ad Hoc Channel: Select which channel you want to use at Ad hoc mode. If you