User Manual

communication. In an Infrastructure type network without an Access Point active on the default
channel, clients will scan through all available channels searching for a network with matching SSID.

Changing the Channel:
Changing the channel is only effective in Ad-Hoc networks.
Networks operating in Infrastructure mode automatically scan for a channel. The following
table presents contains the operational channel frequency for several countries.
Appendix A Troubleshooting
Problem Solving
My computer does not recognize the T60H424.
Probable Solution:
 The T60H424 is not properly inserted into the PCMCIA/MiniPCI slot.
 Ensure that the T60H424 has been inserted into an available PCMCIA/MiniPCI slot.
The T60H424 does not work properly.
Probable Solution:
 Insert the PCMCIA/MiniPCI adapter into Notebook’s slot again. A beep should be heard if the
adapter is properly inserted.
 Check the I/O cable that connects the RF module and the PCMCIA/MiniPCI adapter. The power
LED(T60L198) indicator will be active if the cable is properly connected.
 For non-Windows 95/98 environments, ensure that a PCMCIA/MiniPCI card service driver is