User's Manual

PCI Full Rate ADSL Modem Driver Installation
A2RAI-081699
Date Printed: 12/20/99 Page 7 Man_A2.DOC7
3. INSTALLING THE AMBIT PCI DEVICE DRIVERS AND UTILITY
Please have the following information available in order to complete the installation and setup of
the Ambit PCI ADSL Modem.
1. TCP/IP properties, this includes the PVC values (VPI and VCI), IP address, the gateway, and
the domain name server. You will need this information to complete the configuration of the
network modem card. Please contact your MIS manager for more information regarding the
TCP/IP settings.
2. Windows 95, 98 or NT4.0 diskettes or Installation CD.
3.1 Windows 98
* BEFORE YOU START: You need the Windows 98 system installation files (CAB files)
to complete the installation (Which comes with your PC system).
This section describes how to install the network driver when your PC is running Windows 98.
There are two major revisions of Windows 98:
1) Windows 98 original (or it may be referred to as the 1
st
Edition)
2) Windows 98 2
nd
Edition
Please make sure your OS is either Windows 98 1
st
Edition or Windows 98 2
nd
Edition. Windows
98 2
nd
Edition can support advanced features which Windows 98 1
st
Edition can not. If you are
running Windows 98 2
nd
Edition, installing the Windows drivers to your system is highly
recommended. If you are not sure of the operating system version currently used, please contact
your original PC manufacturer for information. Make sure the Ambit PCI ADSL Network Modem
is installed. Turn your PC on.
Windows will find the Ambit ADSL Network Modem and will search for a device driver for the card.
Click Next.