MIC-A2 WIFI Module User Manual Rev. 0.
Reviewers Review Dates Department Name Plan Results Director of Engineering Hardware Engineering Confidential 2
Table of Contents 1. INTRODUCTION .................................................................................................................................................. 4 1.1 SCOPE .............................................................................................................................................................. 4 1.2 FUNCTION ..............................................................................................................................................
1. Introduction Project Name: 802.11n WIFI module This documentation describes the product specification of the 802.11n WIFI module, it is a confidential document of FOXCONN. 1.1 Scope The MIC-A2 802.11n WIFI module provides wireless modem functionality utilizing OFDM technology. The objective of this use manual is to verify the functionality of the MIC-A2 802.11n WIFI module RF/Digital electronic design against the design specifications.
2. Product Specification 2.1 Electrical Specification Absolute Maximum Ratings These specifications indicate levels where permanent damage to the device can occur. Functional operation is not guaranteed under these conditions. Operation at absolute maximum conditions for extended can adversely affect long-term reliability of the device.
3.
4. Regulatory Information USA-Federal Communications Commission (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
system. The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. Caution: Exposure to Radio Frequency Radiation. To comply with IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
